Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It is discrete and does not have LED indicators or key fobs, and is hidden in the wiring of your vehicle.
It also permits the user to turn off the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from hacking, key cloning and relay attacks. The system is directly connected to your vehicle's ECU and is secured by a unique PIN code that you can choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It cannot be disabled with circuit cuts.
The system is easy to use, however it's important to have professional installation to ensure a smooth and secure connection to your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm system to complete the protection package for your vehicle.
how much is a ghost immobiliser is to disconnect your battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer may be able to work safely. Hand tools are the most basic to be used to make precise connections. A multimeter is useful to verify electrical values. Insulation tape and cable tie are essential to protect connections and ensure that wiring is neat. Lastly, the user manual gives specific guidelines that are specific to your Ghost Immobiliser model.
During the installation process, it's crucial to select the right grounding location that is free of any paint or debris. The installer must also make sure the immobiliser's CAN H and CAN L wires are connected to the correct ports on your vehicle's ECU. The wires can be plugged into or soldered based on the model. To ensure a secure and durable connection it is recommended that you choose a top-quality plug.
After the installation is completed After the installation is complete, the customer can turn on after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. To accomplish this, the user must press the service button on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a great option for anyone who regularly rents their vehicle on platforms such as Turo. An immobiliser can reduce insurance costs, since it decreases the likelihood of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device stops your car from starting even if someone steals or copies your key. This is due to its advanced technology that is designed to prevent the engine from running until the correct PIN code is entered.
The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your car. This is the best security system to protect your car's pride and joy, keeping its value intact should you decide to sell it in the future.
Installing a ghost immobiliser is an easy process, however, it's important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you have to locate and identify a constant 12V power source and an adequate grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering methods to create a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid electrical short circuits.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. When everything is functioning correctly then you can put it in a safe location under the dash or elsewhere in the vehicle. Make sure you hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a high-quality deterrent to car burglars. It is a superior defense against key cloning, hacking, and relay attacks, and cannot be disabled without knowing the code. The device is also simple to use and can be put into a service valet mode so that your car isn't activated if you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to deter theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU which makes it virtually undetectable as an addition to your car. The Ghost Immobiliser will not interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals and instead uses CAN data for communication with your ECU. In addition, it doesn't need any modifications to your vehicle's existing key fobs.
Enter your sequence for disarming (either two or one buttons) and then turn on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, ghost car immobiliser against hacking or key cloning, while protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you have to hand your car to service or valet parking.
You'll require a constant power source (12V) in addition to a grounding source to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and can be touched. Cable ties are also recommended for bundling and securing the wires. This reduces the chance of theft by thieves. To avoid mistakes, double-check these points and mark them with a label or tape. Verify every connection for signs that they are wearing out. Make sure all connections are firmly in place, and are properly insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit functions correctly and that all connections are secure and insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your vehicle's ECU to block unauthorised engine start. Its cutting-edge technology protects your vehicle against hacking and key cloning and other common methods employed by thieves to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to offer the ultimate security for your vehicle. The Ghost's unparalleled features, paired with its secluded design, make it a popular choice for drivers who love cars and security-conscious drivers.
It is essential to follow the procedures for installation to ensure a complete integration of the Ghost Immobiliser. A good starting point is to refer to the wiring diagram for your vehicle that will serve as a guideline to locate and connecting the wires required. You'll then need to identify the grounding and power sources. Once you've found them then you'll have to mark them in a way that they are easy to locate when installing. Finally, it's vital to use only the best tools and materials. Hand tools are essential to help you make precise connections. A multimeter will verify electrical values, and also ensure security. Insulation tape and cable tie will ensure that all connections are tidy. Additionally, a user's manual will provide specific guidance tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code, then starting the vehicle. This test will verify that the immobiliser works according to plan, and prevents unauthorised vehicle starts. This step should be performed regularly as part your regular vehicle inspections in order to ensure the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will help keep your car and its contents secure from thieves who might steal it and ensure that nobody is able to take off with your vehicle without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost can be utilized on a variety of vehicles and is compatible with all major brands. If you're looking to secure your vehicle using this advanced device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Installer who is registered This certification ensures that we follow strict standards and procedures for installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that installations are carried out safely and in a safe manner.