The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the car from starting if it does not have an ignition key fob. They also work well to stop hotwiring or other traditional forms of vehicle theft. Innovative methods like key cloning and relay theft are becoming more common.
To combat these latest trends The ghost immobiliser is designed to make your vehicle inaccessible. It doesn't use LED indications or radio signals or key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key theft and cloning. It is a TASSA-approved product and insurance companies have endorsed it. It operates quietly and is virtually undetectable to thieves. It makes use of buttons on your steering wheel, center console and door panels to make a unique pin code sequence that must be entered before you can start your vehicle. You can create up to 20 different sequences to increase security. The system is simple to set up and does not require any additional wiring or hardware.
To ensure the best possible results, it is recommended that you choose a reputable CAN-immobiliser installer who specializes in your specific vehicle. Ideally, they will have a workshop located in your local area, allowing you to visit and get the installation completed. You will also find various tools and materials that can aid you in the installation. They will have basic hand tools, a multimeter, and insulation tape and heat shrink tubing to safeguard the connections. A user's manual will give instructions specific to the wiring in your vehicle.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is important to double-check the location of the CAN H and CAN L wires, since incorrect identification could lead to unintentional system integration. It is recommended to mark the wires using tiny pieces of tape or label them. Use a multimeter to confirm that the power source is providing a constant 12V.
Advanced thieves employ various methods to bypass the Ghost Immobiliser. These include blocking and making false signals. These methods work by amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. With advanced anti-jamming technologies and vigilant monitoring your vehicle will be protected from these sophisticated attacks.
Enhanced security
Ghost immobilisers provide an additional layer of protection to protect your vehicle from theft. It uses a PIN code security system that can be activated by pressing buttons on the steering wheel or on your dashboard, making it difficult for thieves to gain access to the device and steal your vehicle. The device is also designed to be hidden in the vehicle, and is devoid of lights or other indicators that would warn thieves of its presence. It communicates with your car's ECU via the data bus, so it is not susceptible to the same hacking and relay attacks that could disable conventional security systems.
The system is an excellent investment for those who own luxury vehicles, as they are at greater risk of being stolen due to their value and their popularity. Its enhanced security features guard against key copying, ECU swapping, and other threats to your car's security. Ghost immobilisers can be linked to an app, allowing you can easily arm and dearm them. They can also have an option for service/valet that allows you to temporarily disable them while your vehicle is being repaired or serviced.
Another benefit of ghost immobilisers is that it does not require cutting of wire. This is an excellent option, particularly if your car is newer and does not include an immobiliser. Certain systems are equipped to work with an GPS tracking device, which can provide additional security for your vehicle. A GPS tracker could also lower your insurance rates. If you decide to purchase an immobiliser that is ghost, make sure it's TASSA-certified and a professional installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been made to work with all major models and makes, securing your pride and joy from theft. It utilizes buttons on your steering wheel, the centre console or door panels to generate an individual pin code which must be entered before you are able to drive your vehicle. It is tamper-proof, undetectable, and is covered by a three-year warranty. It is also fully endorsed by insurance companies This means that it can help to lower your insurance premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition however, the Ghost system operates by directly connecting to the engine controller unit through the CAN data bus. It is almost impossible to disable, remove or hack. The Ghost system can also be paired with an iPhone app for remote monitoring and management.
You can create a PIN that is easy to remember, but mathematically, it is impossible to guess for thieves. You can alter and customize the PIN at any time to ensure your vehicle's security even when it's situated in a parking area or on the street. You can also select a valet or service mode in case you need someone other than you to drive your car temporarily for instance, when it's in garage for servicing. This feature will also help prevent your car from being taken by a shady mechanic. To ensure your peace of mind you can choose a Ghost call alert to notify you if your vehicle is moving or it's been moved.
Convenience
The ghost immobiliser is an effective security system, securing your vehicle against typical methods of theft such as key cloning and relay attacks. It connects to the car's CAN network and blocking communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your car, making the installation of this system a good idea for any driver.
After installation, you'll have to enter a PIN sequence up to 20 digits using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely concealed and thus unnoticeable to thieves. It does not emit radio frequency signals. It can also be configured to allow an individual-changeable PIN code which adds security. The system is designed to avoid cutting of circuits, making it virtually impossible to tamper.
Some systems allow you to communicate directly with the immobiliser through an app on your smartphone to disarm it immediately when you forget your PIN. Some come with a service/valet mode that allows you to start your car temporarily, for instance, when you need to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit any radio signals, which is a significant advantage over other aftermarket car security systems. It is also simple to use and doesn't require complicated wiring. car ghost immobiliser can also be used in conjunction with a dash cam for added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system is able to be hardwired to ensure the highest performance and durability.
Installation
If you want to protect your vehicle from thieves it is important to select the right immobiliser ghost. This device can prevent car thefts by preventing the communication between key fobs and the engine controller unit. This stops thieves from stealing the signal and then cloning the key fob to begin your car. It also detects the moment it has been altered with and alert the owner of the vehicle.
The device is simple to install and can be integrated with the vehicle's existing systems. It does not require any modification to the vehicle wiring and can be placed in a concealed location like under the dashboard. Follow the steps in the manual to make sure that the device is installed correctly. After installation, it is crucial to test the system. This will ensure that the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to steal the system or bypass it. Installation generally takes between 2 and 3 hours.
During the installation process it is recommended that you review the wiring diagram of the vehicle model you are using. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Make sure to double-check the connections to make sure they're secure and insulated.
Once the installation has been completed, you can start using the Ghost Immobiliser normally. It will turn off the ignition of your vehicle if it is not able to start it using the correct PIN, which is something you can enter yourself. The ghost immobiliser cost can also be put into Service/Valet mode for times when you have to hand over your vehicle to service or valet parking.